Welcome To STRONG H MACHINERY TECHNOLOGY CO.,LTD. !

News Center

Contact us

Contact: Nancy

Phone:13583556230

Tel:86-535-2292508

E-mail:nancy@strongh.cn

Address:No. 1699 Kaiming Road, Laizhou Development Zone, Shandong Province, China

Home > News > Industry News

Solutions to the failure of the mask machine (1)

Release time: 2020-08-31

Views: 1059

Solutions to the failure of the mask machine (1)

The mask machine is a mechanical equipment for the production of masks, which needs to be debugged after being purchased from the mask machine manufacturer. Usually the more professional and responsible mask machine manufacturers will complete the commissioning of the mask machine according to the customer's requirements when delivering. However, during the production process of the mask machine, other causes of failure will inevitably occur, which requires the user of the mask machine to adjust and repair by himself.

 

This article is provided by Strong H Machinery Technology Co., Ltd., a well-known mask machine manufacturer in China, to find a solution for the failure of the mask machine.

 

solutions of mask machine


Fault 1: Uneven welding and distortion of the workpiece.

 Solution:

1. Check whether the size of the workpiece is different.

 2. Check whether the operating conditions cause deformation of the work

 3. Adjust the buffer speed or pressure.

 

 Fault 2the base support is not stable.

 Solution:

1. Improve support points where necessary.

 2. The base is redesigned.

 3. Replace with a hard base

 4. If a large area of bakelite is inclined, it needs to be reinforced.

 

Mask machine solutions


Fault 3: the contact surface of welding head, base and workpiece is not flat.

 Solution:

1. Redesign the energy conservation point to make the height uniform.

 2. Adjust the level screw.

 3. Check whether the pretending conditions are true.

 4. Check the shape and size of the workpiece size.

 5. The side is curved and the workpiece is ribbed

 6. Modify the jig to avoid bending of the workpiece.

 

Fault 4: the workpiece error is too large.

 Solution:

1. Tighten the tolerance of the workpiece.

 2. Re-modify the size of the workpiece.

 3. Check the operating conditions (pressure, delay timing, welding timing, curing timing, etc.)

 

For more solutions to the failure of the mask machine, please visit Strong H Machinery Technology Co., Ltd. We are an OEM manufacturer of mask machines from China. We provide various styles of mask machines with competitive prices and excellent quality. Welcome to order.