Welcome To STRONG H MACHINERY TECHNOLOGY CO.,LTD. !

News Center

Contact us

Contact: Nancy

Phone:13583556230

Tel:86-535-2292508

E-mail:nancy@strongh.cn

Address:No. 1699 Kaiming Road, Laizhou Development Zone, Shandong Province, China

Home > News > Industry News

The 3 failure performances and solutions of N95 mask machine

Release time: 2020-07-15

Views: 1068

The 3 failure performances and solutions of N95 mask machine

The fully automated N95 mask machine is a high-efficiency equipment for the production of N95 masks. It has the characteristics of exquisite finished products, low error rate, and convenient operation. In the long-term use process, N95 mask machine will inevitably have some failures. For these failures, manufacturers need to make timely failure analysis and find solutions to reduce the impact of the failure on mask production.


KN95 Mask Machine Part

KN95 Mask Machine Part

 

Question 1: The power switch of the N95 mask machine, the ultrasonic power indicator of the mask machine does not light, and there is no action

 

Failure analysis:

1. Poor contact between the power cord of the mask machine and the power socket

2. The power fuse of the mask machine is burnt

 

Solution:

1. Check whether the power cord and power socket are in poor contact, and reconnect the circuit.

2. Replace the power fuse

 

Question 2: Turn on the power switch of the N95 mask machine, the power indicator light is on, but there is no action, press the ultrasonic test button of the mask machine, there is ultrasonic output

 

Failure analysis:

1. The five-core wire connecting the mask machine base and the frame is open

2. Problems with the machine program circuit board

 

Solution:

1. Close the five-core wire

2. Consult the mask machine manufacturer or professional for the cause of the circuit board failure, and replace the new circuit board when necessary

 

Question 3: Turn on the power switch of the N95 mask machine, the power indicator light is on, but there is no action. Press the ultrasonic test button of the mask machine, there is no ultrasonic output

 

Failure analysis:

1. Whether the emergency stop switch of the mask machine is pressed

2. The 110V or 24V power supply of the ultrasonic power transformer of the mask machine is abnormal

3. Machine program circuit board fault

 

Solution:

1. Check the emergency stop switch of the mask machine, if it is pressed, please turn it off

2. Ensure that the power supply of the ultrasonic power transformer is normal

3. Consult the mask machine manufacturer or professional for reasons of circuit board failure, and replace with a new circuit board if necessary

 

KN95 Mask Machine

KN95 Mask Machine


The above are the three main fault performances and cause analysis of the N95 mask machine. If the above solutions cannot solve the problem, please consult the merchant who sold the mask machine in detail. If you are interested in mask machine and want to purchase high quality Chinese mask machine, please contact Strong H Mask Machine Manufacturing Co., Ltd.